ESPrtk NTRIP model transmit for Rover.

ESPrtk Rover Standard
Mode
RTK
Receiver
Internet
connection
required
Receive RTCM/RAW… data from Base (sent by NTRIP Caster -Cloud Server ) and stream out to TX-UART-RTK (TX1/TX2) port. Need in Rover mode. YES

ESPrtk internet NTRIP model transmit

Step 0: NTRIP account.

To use NTRIP service, users need to have an NTRIP account, if not, Click here to create an NTRIP account.  

Step 1 : Hardware connection.

To connect ESPrtk with RTK receiver,  Click here for more detail.  

Step 2 : Configure  Wifi Hotspot.

If using wifi connection to access the internet, add the Router’s SSID and Password. 

Step 4 : Configure  NTRIP Client

Step 5 : Configure Action Planning.

ESPrtk :

  • Get RTCM/RAW.. data from Base ( via NTRIP ), then stream out RTCM data to   TX_UART1.

Other setting : 

Besides the main action of exporting data stream to TX_UART_RTK port on Rover, ESPrtk can run many other actions at the same time, the supported actions are:

Step 6  – Final : Testing and Running.

Please make sure the configuration is saved correctly. Now press the “Reset” button on ESPrtk, it will start working.

Other tutorial for DIY NTRIP CLient with SNIP : Example : use NTRIP Client for Rover ESPrtk

For Rover “Standard” : <video>

For Rover “Standard+ BLE Viewer” :<video>

ESPrtk NTRIP model transmit for Rover.

ESPrtk Rover Standard
Mode
RTK
Receiver
Internet
connection
required
Receive RTCM/RAW… data from Base (sent by NTRIP Caster -Cloud Server ) and stream out to TX-UART-RTK (TX1/TX2) port. Need in Rover mode. YES

ESPrtk internet NTRIP model transmit

Step 0: NTRIP account.

To use NTRIP service, users need to have an NTRIP account, if not, Click here to create an NTRIP account.  

Step 1 : Hardware connection.

To connect ESPrtk with RTK receiver,  Click here for more detail.  

Step 2 : Configure  Wifi Hotspot.

If using wifi connection to access the internet, add the Router’s SSID and Password. 

Step 4 : Configure  NTRIP Client

Step 5 : Configure Action Planning.

ESPrtk :

  • Get RTCM/RAW.. data from Base ( via NTRIP ), then stream out RTCM data to   TX_UART1.

Other setting : 

Besides the main action of exporting data stream to TX_UART_RTK port on Rover, ESPrtk can run many other actions at the same time, the supported actions are:

Step 6  – Final : Testing and Running.

Please make sure the configuration is saved correctly. Now press the “Reset” button on ESPrtk, it will start working.

Other tutorial for DIY NTRIP CLient with SNIP : Example : use NTRIP Client for Rover ESPrtk

For Rover “Standard” : <video>

For Rover “Standard+ BLE Viewer” :<video>


Old school Swatch Watches