ESPrtk NTRIP model transmit for Base.
ESPrtk Base Standard Mode |
RTK Receiver |
Internet connection required |
---|---|---|
Get RTCM/RAW /.. data from RX_UART1 then send to NTRIP Caster (Cloud Server). | Need in Base mode. | YES |
ESPrtk internet NTRIPmodel transmit
Step 0: NTRIP account.
To use NTRIP service, users need to have an NTRIP account, if not, Click here to create an NTRIP account.
Step 1 : Hardware connection.
To connect ESPrtk with RTK receiver, Click here for more detail.
Step 2 : Configure Wifi Hotspot.
If using wifi connection to access the internet, add the Router’s SSID and Password.
Step 4 : Configure NTRIP Master.
Step 5 : Configure Action Planning.
5.1 – For Base”Standard” :
ESPrtk :
- Get RTCM/RAW /.. data from RX_UART1 then send to NTRIP Caster (Cloud Server).
Other setting :
Ethernet:
If you want to use ENC28J60 Ethernet to access internet, select “Ethernet – ENC28J60” in Internet Connection.
Step 6 – Final : Testing and Running.
Please make sure the configuration is saved correctly. Now press the “Reset” button on ESPrtk, it will start working.
See other tutorial for NTRIP Server with SNIP: Example : use NTRIP Master for Basestation ESPrtk
For Base “Standard” : < video >
After about 5 minute run, go can visit http://www.rtk2go.com:2101/SNIP::STATUS to check Status of your NTRIP Base: